18″ Walk Behind Saw

IDEAL FOR... Short-run slab cutting Contraction joints Patch repairs in asphalt Traffic loop installation Trenching PRODUCT APPLICATIONS Concrete/Asphalt Cutting & Drilling

Black & Decker Core Drill

Some signs of cosmetic wear, but is fully operational and functions as intended. model 748 2 Speed (350 to 900rpm)

Sawmaster SDT-1410 Table Saw-BRAND NEW!

SDT-1410 Masonry Saw ideal for dry cutting of brick, block, pavers, and other masonry applications! The SDT-1410 is a dry-cutting masonry chop saw designed for brick & block jobs. Due to the large 14" blade and potent 3 HP carbon-brush motor, the unit can effectively cut blocks up to 5" thick in a single pass. Despite the saw's overwhelming power and cutting capacity, it is nevertheless one of the lightest in its class--weighing only 75 lbs. For added versatility, the saw can be outfitted with an optional wet or dry kit to adapt the saw for use in a variety of situations. Comes with Stand.

CAYKEN-Core Drill Rig Motor with KCY-200F Aluminum Stand

The Cayken CY-5050 is designed for wet or dry core drilling and comes with the Cayken 200F adjustable aluminum stand. This drill will cut up to 20-inch holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. This drill has a 7.2 HP motor with three (3) gear speeds. Spline is 1-1/4 in. x 7 TPI. Drill features safety clutch and overload protection. Package includes wrench set, two (2) motor brushes, and 1/4-inch water valve with shut off.

Diamond Products Core Cut 30062 CB700 Electric Core Bore Drill Motor

Diamond Products Drill motors are for use with drill rigs. The CB700 model includes an on/off switch and has a built-in thermal overload protection, along with a water connection that can be used for wet drilling.

Milwaukee Diamond Core Drill Motor 450/900 RPM, 20 Amp with Clutch

Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 rpm or 900 rpm operating speed. The 4096 has a clutch to protect gears and motor against overload. This unit will handle core bits from 2 in. to 10 in. in diameter.

Husqvarna DM 340 Electric 3 Speed Core Drill Rig Motor

DM 340 is the perfect choice for medium and heavy core drilling where high production rates are needed, especially with large diameter core bits. Recommended diameter up to 16 in. The motor is very easy to operate with several ergonomic features facilitating drilling and set up. Suitable for water evacuation, ventilation, angle drilling and stitch drilling.