The Dustless® Wet/Dry Vacuum fills the niche between expensive industrial HEPA vacuums and cheap shop vacuums that have been retrofitted with HEPA or “fine dust” filters. This vacuum is very popular with contractors because it gives them the ability to switch from dry to wet vacuuming without stopping to change the filters. The inner and outer filters stay dry at all times. The system uses a WunderBag™ micro pre-filter that retains its strength when wet. It also features a patented filter system with inner and outer filters, both made out of machine washable fabric. An agitator rod lets users clean the outer filters without opening the unit.
Dustless -Wet and Dry Vacuum
- Exhausts absolutely no dust back into the air
- Triple layer filter system
- Captures extremely fine dust from drywall, concrete, wood, fiberglass, stone, and masonry products
- Clean filters without opening the unit
- Go between wet and dry without switching filters
- Filters and pre-filters won’t be compromised by water or slurry
- Large capacity barrel easily holds 40 pounds of dust
- New and improved barrel clamps
Related products
Dustless – HEPA Wet and Dry Vacuum
- Fully certified and serialized HEPA filter for airtight rating
- Safe for silica, asbestos, lead paint, and hexavalent chromium removal and containment
- OSHA and EPA RRP compliant w/semi-auto filter cleaning mechanism
- Go between wet and dry without switching filters
- Filters and pre-filters won’t be compromised by water or slurry
- Will never blow dust or pickup back into the air
- Large capacity barrel easily holds 40 pounds of dust
Dustless – 5″ DustBuddie XP w/ 18″ Hose
- Vacuum shroud used in dust containment while grinding with angle grinders
- Fits up to a 5-inch wheel on most 4.5 to 6-inch angle grinders
- Fits collars 2.1-inch down to 1.3-inch
- Made of glass-filled nylon for abrasion resistance and rugged durability
- Sliding front edge of shroud for grinding close to a wall or edge
- Patented floating head design
- Replaceable brush skirt improves dust collection
- Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
Dustless – DustBuddie for Flatwork
- Vacuum shroud used in dust containment while using gas powered saws for flatwork
- 2018 Pro Tool Innovation Awards Finalist , Dust Collection Shroud Category
- Fits most gas powered cut off saws and captures up to 90% of concrete dust
- Made of aluminum for rugged durability
- Polyethylene sliders to protect the work surface
- Connects to a 2” soft hose cuff
- Complies with OSHA Silica Rule when used with objective data (see link below)
- Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)
Dustless – DustBull & Universal Mounting Kit
- Vacuum shroud used in dust containment while using gas powered saws for masonry work
- 2018 Pro Tool Innovation Awards Winner, Dust Collection Shroud Category
- Fits most gas powered cut off saws and captures up to 90% of concrete dust
- Made of aluminum for rugged durability
- Rubber feet protect the work surface
- Connects to a 2” soft hose cuff
- Complies with OSHA Silica Rule
- Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)
Dustless – Wunderbag Micro Pre-Filters, 2 Pack
- Works with most major brands of vacuums to add superior filtration
- Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
- Rated at 0.5 microns of filtration for both airborne particles and water
- Retains its strength and filtration while vacuuming water and slurry
- Capable of holding 40 pounds of debris
Dustless – 4″ BitBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using drills and percussion hammers
- Captures up to 99% of concrete dust and slurry
- Works with any drill bit 4in or smaller
- Made of flexible rubber that sucks to any surface
- Complies with OSHA Silica Rule and EPA Regulations for point-of-origin dust containment
Dustless – 1 3/8″ BitBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using drills and percussion hammers
- Captures up to 99% of concrete dust and slurry
- Works with any drill bit 1 3/8” or smaller
- Made of flexible rubber that sucks to any surface
- Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
Dustless – 5″ DustBuddie Shroud w/ 18″ Hose
- Vacuum shroud used in dust containment while grinding with angle grinders.
- Fits most 4-inch to 5-inch angle grinders.
- Made of clear polycarbonate for improved visibility and durability.
- Removable front edge of shroud for grinding close to a wall or edge.
- Complies with EPA regulations for point-of-origin dust containment when used with a Dustless Technologies D1606 HEPA Vacuum