The TS 420 is so popular, it could possibly be called “the standard” to which other cut-off machines are compared. Users like it because it is compact, lightweight, reliable and proves itself day in and day out, all day long. The TS 420 features all the high-performance features of the TS 410 – including an X2 air filtration system for a clean and smooth-running engine and virtually maintenance-free filters. With the added benefit of a 14” cutting wheel, it will handle cuts up to 4.9 inches in depth. This cut-off machine backs up its larger cutting capacity with a ton of usability features.
TS 420 STIHL Cutquik®
STIHL TS 420 Cutquik
An all purpose Cut-Off Machine for above and below ground. With a 350mm cutting blade to cut up to 125mm deep. The STIHL anti vibration system guarantees this Cut-off Machine is comfortable to operate. This machine also has a long life air filter system, and a decompression valve so it is easier to start. It is economical and environmentally friendly due to it’s 2-MIX engine.
Description
Additional information
| TS 420 STIHL Cutquik® Specifications | DISPLACEMENT ENGINE POWER WEIGHT* FUEL TANK CAPACITY ENGINE SPEED MAXIMUM SPINDLE SPEED ARBOR SIZE MAXIMUM WHEEL SIZE MAXIMUM CUTTING DEPTH POWER SOURCE |
|---|---|
| NOTE: | STIHL recommends use of fuel with no more than 10% ethanol content. Using fuel with greater than 10% ethanol content may cause damage to your equipment and may void your STIHL warranty. |
| WARNING: | Never use carbide-tipped, wood cutting or circular saw blades on cut-off machines. They can cause severe personal injury or death from reactive forces, blade contact or thrown tips. Never cut wood of any type. |
Related products
TS 800 STIHL Cutquik®
The TS 800 Cut-off Machine now featuring a magnesium guard and reduced weight.
The TS 800 also features an ergonomic design and five-point advanced vibration control system built right into the handle, maximizing comfort so you can power through your day with less fatigue. When long, straight expansion joint cuts are needed, the optional cart, mounted water tank, guide wheel and depth gauge wheel make it easy to help keep the cut straight. With a cutting depth of up to 5.6”, the TS 800 is a real pro performer whether in your hands or on the cart. 16″ Rollomatic G Guide Bar
A guide bar made exclusively for the GS 461 STIHL ROCK BOSS® and STIHL Diamond Abrasive Chain 36 GBM.
Applications: This guide bar is to be used exclusively with the GS 461 STIHL ROCK BOSS® concrete cutter and the STIHL Diamond Abrasive Chain 36 GBM; this guide bar is NOT to be used with any other STIHL products, including chainsaws. The bar is designed to cut concrete, reinforced concrete (with rebar up to ½ inch), cinder blocks and masonry (including bricks, asphalt and soft stone such as sandstone).