2-Cycle ULTRA Engine Oil
$0.00
This fully synthetic 2-cycle engine oil is specially suited for high performance chainsaws and power tools.
Description
HP Ultra is a fully synthetic 2-cycle engine oil specially suited for high performance chainsaws and power tools. This oil has outstanding engine cleaning characteristics, plus “ultra” superior lubricating qualities in comparison to other 2-cycle engine oils. It is ideal for use in STIHL 4-MIX® engines. This oil is biodegradable, degrading by 80% in 21 days.
Additional information
| Sizes | 2.6oz ,6.4oz |
|---|
Related products
GS 461 ROCK BOSS®
A powerful concrete cutter designed for deep cutting and square corners – perfect for construction and renovation projects.
Lightweight, easy to maneuver, fast-cutting concrete cutter for deep cutting and cutting corners. When you need to cut deep into concrete, reach for the Boss – the STIHL GS 461 ROCK BOSS®. This revolutionary concrete cutter changes the game with enhanced performance that cuts up to 15.7” deep into concrete, reinforced concrete (with rebar up to ½ inch), cinder blocks, masonry bricks, asphalt and soft stone. And it does all of this in a compact, lightweight package that is easy to maneuver and transport. It’s a great addition to your construction site when you need to get serious with concrete materials. And because it’s a STIHL, you know it delivers excellent performance. The GS 461 ROCK BOSS® features include a low exhaust emission engine, HD2 heavy-duty air filter, advanced water controls, low vibration, and our exclusive Diamond Abrasive Chain.
STIHL MotoMix®
Only from STIHL - This patented 50:1 fuel mixture combines non-ethanol, high-octane fuel and premium STIHL HP Ultra Oil.
We stand behind this formulation by doubling the limited warranty when you include MotoMix® with your power tool purchase. STIHL MotoMix® contains no ethanol, allowing it to maintain stability for up to two years after the seal is broken - so it stays fresh in your equipment during long storage periods.
Hitachi – Spline Shank Rotary Hammer
DH38YE3M, Metabo HPT 1-9/16 in. Spline Shank Rotary Hammer The 1-9/16" Spine Shank Rotary Hammer - model DH38YE3 is power packed into a more ergonomic body that is lighter and delivers less vibration. A simple turn of the knob changes the mode from hammer drilling to hammer only mode, allowing this rotary hammer to take on a variety of tasks including drilling holes in concrete, demolishing, and chiseling concrete, cutting, digging, tamping or driving ground rods.
The 10 amp, 1,140 watt motor produces 6.3 ft-lb of impact energy and delivers fast drilling and chiseling. A 360-Degree side handle and large trigger switch offer more control with less fatigue. With 23% more drilling speed and 46% more demolition performance you can get the job done even faster!
