MS-291 – STIHL Chainsaw
Another high-tech STIHL chainsaw, the MS 291 is built around one of our new fuel-saving engines with longer run times and lower emissions. And with an advanced pre-separation air filtration system, your air filter can last up to five times longer. Another great feature is an advanced anti-vibration system to reduce user fatigue. STIHL engineering is to thank for this high-powered, high-tech, low-maintenance chainsaw. It is truly a force to be reckoned with.
- Caring for Nature -Identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines – low exhaust emissions as being cleaner than EPA and- or CARB exhaust emission standards
- STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience
- Pre-separation Air Filtration System – This time-saving technology boosts the efficiency of the engines filter system, doubling the time between air filter cleanings
- The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
Description
Specifications
Additional information
| MS 291 Specifications | DISPLACEMENT 55.5 cc (3.39 cu. in.) ENGINE POWER 2.8 kW (3.76 bhp) POWERHEAD WEIGHT 5.6 kg (12.3Ibs.) FUEL CAPACITY 500 cc (16.9 oz.) CHAIN OIL CAPACITY 240 cc (8.12 oz.) OILOMATIC® CHAIN .325 RM3 GUIDE BAR LENGTHS (Recommended ranges) 40 to 50 cm (16″ to 20″) STIHL ROLLOMATIC® POWER SOURCE Gas |
|---|---|
| Chain & Bar Recommendations | STIHL recommends #3634 (26 RM3 67) OILOMATIC® saw chain and 16″ 3003 000 6813 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on. |
| WARNING! | The occurrence called “kickback” can cause serious or fatal injury. Always read the instruction manual carefully before using your saw. STIHL uses a green and yellow color-coding system to help you select a powerhead, bar and chain combination that complies with the kickback requirements of ANSI Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/ ANSI Standard B175.1 (electric chainsaws). Ask your STIHL dealer about safe operating procedures and the advantages of the STIHL Quickstop® chain brake, STIHL Quickstop® Plus (Q) additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback saw chains. |
Related products
Hitachi – 6.4 amp Side Switch Angle Grinder
HIGHLIGHTS OF THE 4-1/2 INCH ANGLE GRINDER
- INCLUDES: 4 1/2 Inch angle grinder, 5 discs, side handle, case and wrench
- MOTOR: 6.2 Amp motor with 980W of max output power for tough grinding jobs
- SPINDLE LOCK: Spindle lock for quick and easy disc and accessory changes
- SWITCH: Left-mounted slide switch with quick-off feature for added safety
- WARRANTY: 1-Year base warranty gives you peace of mind
Hitachi – Max Rotary Hammer
SPECIFICATIONS
- Box Count1
- SKUG12SE3M
- UPC717709021624
- BrandMetabo HPT
- ConditionNew
- Product ColorBlack, Green
- Special FeaturesAdjustable Wheel Guard
- Item Weight4.2 lbs.
- Housing MaterialPlastic, Aluminum
- Firing TypeTrigger Actuation
- Product TypeGrinder
- Amp Hours10.5 Ah
- Power SourceElectricity
- Special Offer AvailableNo
Hitachi – Spline Shank Rotary Hammer
DH38YE3M, Metabo HPT 1-9/16 in. Spline Shank Rotary Hammer The 1-9/16" Spine Shank Rotary Hammer - model DH38YE3 is power packed into a more ergonomic body that is lighter and delivers less vibration. A simple turn of the knob changes the mode from hammer drilling to hammer only mode, allowing this rotary hammer to take on a variety of tasks including drilling holes in concrete, demolishing, and chiseling concrete, cutting, digging, tamping or driving ground rods.
The 10 amp, 1,140 watt motor produces 6.3 ft-lb of impact energy and delivers fast drilling and chiseling. A 360-Degree side handle and large trigger switch offer more control with less fatigue. With 23% more drilling speed and 46% more demolition performance you can get the job done even faster!
18″ FarmBoss Guide Bar
- Updated, modern graphic design
- FARM BOSS® lightweight guide bar
- Built from high-grade steel for added durability
- Three electrically welded metal plates for stability
- Narrow bar nose design for reduced kickback
- Rails are induction hardened for wear resistance
- Ensures long service life
- Length: 20"
- Nose Size: .325" Pitch
- Gauge: .063"
- Type of Guide Bar: Farm Boss
TS 800 STIHL Cutquik®
The TS 800 Cut-off Machine now featuring a magnesium guard and reduced weight.
The TS 800 also features an ergonomic design and five-point advanced vibration control system built right into the handle, maximizing comfort so you can power through your day with less fatigue. When long, straight expansion joint cuts are needed, the optional cart, mounted water tank, guide wheel and depth gauge wheel make it easy to help keep the cut straight. With a cutting depth of up to 5.6”, the TS 800 is a real pro performer whether in your hands or on the cart.
TS 500i STIHL Cutquik®
A cut-off machine with the world’s first electronically controlled fuel-injection system that increases power, not weight when operating 14” wheels. Abrasive cutting just got more cutting edge. STIHL introduces another industry first with the TS 500i STIHL Cutquik® cut-off machine – the first handheld outdoor power tool to offer an electronically controlled fuel-injection system. This system increases power and performance over 15% while remaining lightweight and well-balanced. The fuel injection system makes starting easier and more reliable by eliminating the choke. Just set the switch to on, prime and pull. Lightweight, powerful and fuel-injected, this 14” cut-off machine is designed for superior balance and handling during your toughest jobs. And just like a powerful sports car, you will be impressed with the amazing acceleration of this machine, getting you back to speed faster than you thought possible. The STIHL TS 500i also features a high-efficiency engine with low exhaust emissions and optimal torque throughout its RPM range. Its Electronic Water Control (EWC) allows for easy water flow adjustment while cutting and its X2 air filtration system maintains an incredible 99.96% cleaning efficiency. This machine has it all, so very little can stand in your way.
