18″ FarmBoss Guide Bar
- Updated, modern graphic design
- FARM BOSS® lightweight guide bar
- Built from high-grade steel for added durability
- Three electrically welded metal plates for stability
- Narrow bar nose design for reduced kickback
- Rails are induction hardened for wear resistance
- Ensures long service life
- Length: 20″
- Nose Size: .325″ Pitch
- Gauge: .063″
- Type of Guide Bar: Farm Boss
Description
The ROLLOMATIC® E is a general-grade laminated guide bar made of high-grade steel. Consisting of three electrically welded metal plates, it is lightweight, yet provides great stability. A sprocket is incorporated in the nose of the bar that carries the saw chain from the top to the bottom of the bar. This not only reduces wear, but also enables the bar nose to be made considerably narrower. This type of construction is an advantage where extensive use is made of the bar nose (i.e. limbing and boring). All STIHL ROLLOMATIC® bars designed with a narrow nose help reduce kickback tendencies. And the star-shaped sprocket can be replaced several times before the whole bar is due for replacement, increasing the service life of the bar.
Additional information
| More Information | Applications: All-around guide bar suitable for small to medium-duty chainsaws. Typically, this bar is not used by professional operators. STIHL recommends using low-kickback, green-labeled chain and green-labeled reduced-kickback bars on all powerheads. |
|---|
Related products
Hitachi – Spline Shank Rotary Hammer
DH38YE3M, Metabo HPT 1-9/16 in. Spline Shank Rotary Hammer The 1-9/16" Spine Shank Rotary Hammer - model DH38YE3 is power packed into a more ergonomic body that is lighter and delivers less vibration. A simple turn of the knob changes the mode from hammer drilling to hammer only mode, allowing this rotary hammer to take on a variety of tasks including drilling holes in concrete, demolishing, and chiseling concrete, cutting, digging, tamping or driving ground rods.
The 10 amp, 1,140 watt motor produces 6.3 ft-lb of impact energy and delivers fast drilling and chiseling. A 360-Degree side handle and large trigger switch offer more control with less fatigue. With 23% more drilling speed and 46% more demolition performance you can get the job done even faster!
STIHL MotoMix®
Only from STIHL - This patented 50:1 fuel mixture combines non-ethanol, high-octane fuel and premium STIHL HP Ultra Oil.
We stand behind this formulation by doubling the limited warranty when you include MotoMix® with your power tool purchase. STIHL MotoMix® contains no ethanol, allowing it to maintain stability for up to two years after the seal is broken - so it stays fresh in your equipment during long storage periods.
TS 500i STIHL Cutquik®
A cut-off machine with the world’s first electronically controlled fuel-injection system that increases power, not weight when operating 14” wheels. Abrasive cutting just got more cutting edge. STIHL introduces another industry first with the TS 500i STIHL Cutquik® cut-off machine – the first handheld outdoor power tool to offer an electronically controlled fuel-injection system. This system increases power and performance over 15% while remaining lightweight and well-balanced. The fuel injection system makes starting easier and more reliable by eliminating the choke. Just set the switch to on, prime and pull. Lightweight, powerful and fuel-injected, this 14” cut-off machine is designed for superior balance and handling during your toughest jobs. And just like a powerful sports car, you will be impressed with the amazing acceleration of this machine, getting you back to speed faster than you thought possible. The STIHL TS 500i also features a high-efficiency engine with low exhaust emissions and optimal torque throughout its RPM range. Its Electronic Water Control (EWC) allows for easy water flow adjustment while cutting and its X2 air filtration system maintains an incredible 99.96% cleaning efficiency. This machine has it all, so very little can stand in your way.
