Dustless – Wunderbag Micro Pre-Filters, 2 Pack

$0.00
 
  • Works with most major brands of vacuums to add superior filtration
  • Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
  • Rated at 0.5 microns of filtration for both airborne particles and water
  • Retains its strength and filtration while vacuuming water and slurry
  • Capable of holding 40 pounds of debris
 

Dustless – 4″ BitBuddie w/ 18″ Hose

$0.00
  • Vacuum shroud used in dust containment while using drills and percussion hammers
  • Captures up to 99% of concrete dust and slurry
  • Works with any drill bit 4in or smaller
  • Made of flexible rubber that sucks to any surface
  • Complies with OSHA Silica Rule and EPA Regulations for point-of-origin dust containment
 

Dustless – 5″ DustBuddie Shroud w/ 18″ Hose

$0.00
  • Vacuum shroud used in dust containment while grinding with angle grinders.
  • Fits most 4-inch to 5-inch angle grinders.
  • Made of clear polycarbonate for improved visibility and durability.
  • Removable front edge of shroud for grinding close to a wall or edge.
  • Complies with EPA regulations for point-of-origin dust containment when used with a Dustless Technologies D1606 HEPA Vacuum

Dustless – DustBuddie for Flatwork

$0.00
  • Vacuum shroud used in dust containment while using gas powered saws for flatwork
  • 2018 Pro Tool Innovation Awards Finalist , Dust Collection Shroud Category
  • Fits most gas powered cut off saws and captures up to 90% of concrete dust
  • Made of aluminum for rugged durability
  • Polyethylene sliders to protect the work surface
  • Connects to a 2” soft hose cuff
  • Complies with OSHA Silica Rule when used with objective data (see link below)
  • Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)
 

Dustless – 1 3/8″ BitBuddie w/ 18″ Hose

$0.00
  • Vacuum shroud used in dust containment while using drills and percussion hammers
  • Captures up to 99% of concrete dust and slurry
  • Works with any drill bit 1 3/8” or smaller
  • Made of flexible rubber that sucks to any surface
  • Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment

Dustless – 7″ CutBuddie Shroud w/ 18″ Hose

$0.00
  • Vacuum shroud used in dust containment while tuck pointing and crack chasing with angle grinders
  • Fits up to a 7-inch wheel on most 6 to 9-inch angle grinders
  • Fits collars 3-inch down to 1.8-inch
  • Adjustable depth for cutting up to 1.5”
  • Made of polycarbonate for rugged durability
  • Metal baseplate takes heavy jobsite abuse
  • Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
 

Dustless – 7″ Worm Drive Saw Shroud

$0.00
  • Vacuum shroud used in dust containment while using worm drive and hypoid saws
  • Fits most 7 1/4” worm drive and hypoid circular saws and captures up to 99% of concrete dust
  • Made of an ABS/Polycarbonate blend for rugged durability
  • Wheels protect the cutting surface and glide smoothly
  • Metal baseplate takes heavy jobsite abuse
  • Quick and Easy tool-free installation
  • Unobstructed view of blade for maximum precision
  • Replacement parts available for extended shroud life

Dustless – DustBull & Universal Mounting Kit

$0.00
  • Vacuum shroud used in dust containment while using gas powered saws for masonry work
  • 2018 Pro Tool Innovation Awards Winner, Dust Collection Shroud Category
  • Fits most gas powered cut off saws and captures up to 90% of concrete dust
  • Made of aluminum for rugged durability
  • Rubber feet protect the work surface
  • Connects to a 2” soft hose cuff
  • Complies with OSHA Silica Rule 
  • Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)

Dustless – HEPA Wet and Dry Vacuum

$0.00
  • Fully certified and serialized HEPA filter for airtight rating
  • Safe for silica, asbestos, lead paint, and hexavalent chromium removal and containment
  • OSHA and EPA RRP compliant w/semi-auto filter cleaning mechanism
  • Go between wet and dry without switching filters
  • Filters and pre-filters won’t be compromised by water or slurry
  • Will never blow dust or pickup back into the air
  • Large capacity barrel easily holds 40 pounds of dust

Dustless -Wet and Dry Vacuum

$0.00
  • Exhausts absolutely no dust back into the air
  • Triple layer filter system
  • Captures extremely fine dust from drywall, concrete, wood, fiberglass, stone, and masonry products
  • Clean filters without opening the unit
  • Go between wet and dry without switching filters
  • Filters and pre-filters won’t be compromised by water or slurry
  • Large capacity barrel easily holds 40 pounds of dust
  • New and improved barrel clamps

Wunderbag Micro Pre-Filters, 2 Pack

$0.00
  • Works with most major brands of vacuums to add superior filtration
  • Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
  • Rated at 0.5 microns of filtration for both airborne particles and water
  • Retains its strength and filtration while vacuuming water and slurry
  • Capable of holding 40 pounds of debris
 

Dustless – SawBuddie w/ 18″ Hose

$0.00
  • Vacuum shroud used in dust containment while using reciprocating saws
  • Fits most models of reciprocating saws
  • Line-of-site gap for clear view of the blade to ensure precise cutting
  • 2.5" bristles create a seal while maintaining flexibility in cutting
  • Complies with EPA Regulations for point-of-origin dust containment

Showing all 12 results

Dustless – Wunderbag Micro Pre-Filters, 2 Pack

$0.00
 
  • Works with most major brands of vacuums to add superior filtration
  • Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
  • Rated at 0.5 microns of filtration for both airborne particles and water
  • Retains its strength and filtration while vacuuming water and slurry
  • Capable of holding 40 pounds of debris
 

Dustless -Wet and Dry Vacuum

$0.00
  • Exhausts absolutely no dust back into the air
  • Triple layer filter system
  • Captures extremely fine dust from drywall, concrete, wood, fiberglass, stone, and masonry products
  • Clean filters without opening the unit
  • Go between wet and dry without switching filters
  • Filters and pre-filters won’t be compromised by water or slurry
  • Large capacity barrel easily holds 40 pounds of dust
  • New and improved barrel clamps

Wunderbag Micro Pre-Filters, 2 Pack

$0.00
  • Works with most major brands of vacuums to add superior filtration
  • Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
  • Rated at 0.5 microns of filtration for both airborne particles and water
  • Retains its strength and filtration while vacuuming water and slurry
  • Capable of holding 40 pounds of debris
 

Dustless – HEPA Wet and Dry Vacuum

$0.00
  • Fully certified and serialized HEPA filter for airtight rating
  • Safe for silica, asbestos, lead paint, and hexavalent chromium removal and containment
  • OSHA and EPA RRP compliant w/semi-auto filter cleaning mechanism
  • Go between wet and dry without switching filters
  • Filters and pre-filters won’t be compromised by water or slurry
  • Will never blow dust or pickup back into the air
  • Large capacity barrel easily holds 40 pounds of dust

Dustless – 5″ DustBuddie Shroud w/ 18″ Hose

$0.00
  • Vacuum shroud used in dust containment while grinding with angle grinders.
  • Fits most 4-inch to 5-inch angle grinders.
  • Made of clear polycarbonate for improved visibility and durability.
  • Removable front edge of shroud for grinding close to a wall or edge.
  • Complies with EPA regulations for point-of-origin dust containment when used with a Dustless Technologies D1606 HEPA Vacuum

Dustless – 7″ Worm Drive Saw Shroud

$0.00
  • Vacuum shroud used in dust containment while using worm drive and hypoid saws
  • Fits most 7 1/4” worm drive and hypoid circular saws and captures up to 99% of concrete dust
  • Made of an ABS/Polycarbonate blend for rugged durability
  • Wheels protect the cutting surface and glide smoothly
  • Metal baseplate takes heavy jobsite abuse
  • Quick and Easy tool-free installation
  • Unobstructed view of blade for maximum precision
  • Replacement parts available for extended shroud life

Dustless – 1 3/8″ BitBuddie w/ 18″ Hose

$0.00
  • Vacuum shroud used in dust containment while using drills and percussion hammers
  • Captures up to 99% of concrete dust and slurry
  • Works with any drill bit 1 3/8” or smaller
  • Made of flexible rubber that sucks to any surface
  • Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment

Dustless – SawBuddie w/ 18″ Hose

$0.00
  • Vacuum shroud used in dust containment while using reciprocating saws
  • Fits most models of reciprocating saws
  • Line-of-site gap for clear view of the blade to ensure precise cutting
  • 2.5" bristles create a seal while maintaining flexibility in cutting
  • Complies with EPA Regulations for point-of-origin dust containment

Dustless – DustBull & Universal Mounting Kit

$0.00
  • Vacuum shroud used in dust containment while using gas powered saws for masonry work
  • 2018 Pro Tool Innovation Awards Winner, Dust Collection Shroud Category
  • Fits most gas powered cut off saws and captures up to 90% of concrete dust
  • Made of aluminum for rugged durability
  • Rubber feet protect the work surface
  • Connects to a 2” soft hose cuff
  • Complies with OSHA Silica Rule 
  • Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)

Dustless – 7″ CutBuddie Shroud w/ 18″ Hose

$0.00
  • Vacuum shroud used in dust containment while tuck pointing and crack chasing with angle grinders
  • Fits up to a 7-inch wheel on most 6 to 9-inch angle grinders
  • Fits collars 3-inch down to 1.8-inch
  • Adjustable depth for cutting up to 1.5”
  • Made of polycarbonate for rugged durability
  • Metal baseplate takes heavy jobsite abuse
  • Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
 

Dustless – 4″ BitBuddie w/ 18″ Hose

$0.00
  • Vacuum shroud used in dust containment while using drills and percussion hammers
  • Captures up to 99% of concrete dust and slurry
  • Works with any drill bit 4in or smaller
  • Made of flexible rubber that sucks to any surface
  • Complies with OSHA Silica Rule and EPA Regulations for point-of-origin dust containment
 

Dustless – DustBuddie for Flatwork

$0.00
  • Vacuum shroud used in dust containment while using gas powered saws for flatwork
  • 2018 Pro Tool Innovation Awards Finalist , Dust Collection Shroud Category
  • Fits most gas powered cut off saws and captures up to 90% of concrete dust
  • Made of aluminum for rugged durability
  • Polyethylene sliders to protect the work surface
  • Connects to a 2” soft hose cuff
  • Complies with OSHA Silica Rule when used with objective data (see link below)
  • Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)