Dustless
Dustless – Wunderbag Micro Pre-Filters, 2 Pack
- Works with most major brands of vacuums to add superior filtration
- Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
- Rated at 0.5 microns of filtration for both airborne particles and water
- Retains its strength and filtration while vacuuming water and slurry
- Capable of holding 40 pounds of debris
Dustless – 4″ BitBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using drills and percussion hammers
- Captures up to 99% of concrete dust and slurry
- Works with any drill bit 4in or smaller
- Made of flexible rubber that sucks to any surface
- Complies with OSHA Silica Rule and EPA Regulations for point-of-origin dust containment
Dustless – 5″ DustBuddie Shroud w/ 18″ Hose
- Vacuum shroud used in dust containment while grinding with angle grinders.
- Fits most 4-inch to 5-inch angle grinders.
- Made of clear polycarbonate for improved visibility and durability.
- Removable front edge of shroud for grinding close to a wall or edge.
- Complies with EPA regulations for point-of-origin dust containment when used with a Dustless Technologies D1606 HEPA Vacuum
Dustless – DustBuddie for Flatwork
- Vacuum shroud used in dust containment while using gas powered saws for flatwork
- 2018 Pro Tool Innovation Awards Finalist , Dust Collection Shroud Category
- Fits most gas powered cut off saws and captures up to 90% of concrete dust
- Made of aluminum for rugged durability
- Polyethylene sliders to protect the work surface
- Connects to a 2” soft hose cuff
- Complies with OSHA Silica Rule when used with objective data (see link below)
- Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)
Dustless – 1 3/8″ BitBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using drills and percussion hammers
- Captures up to 99% of concrete dust and slurry
- Works with any drill bit 1 3/8” or smaller
- Made of flexible rubber that sucks to any surface
- Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
Dustless – 7″ CutBuddie Shroud w/ 18″ Hose
- Vacuum shroud used in dust containment while tuck pointing and crack chasing with angle grinders
- Fits up to a 7-inch wheel on most 6 to 9-inch angle grinders
- Fits collars 3-inch down to 1.8-inch
- Adjustable depth for cutting up to 1.5”
- Made of polycarbonate for rugged durability
- Metal baseplate takes heavy jobsite abuse
- Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
Dustless – 7″ Worm Drive Saw Shroud
- Vacuum shroud used in dust containment while using worm drive and hypoid saws
- Fits most 7 1/4” worm drive and hypoid circular saws and captures up to 99% of concrete dust
- Made of an ABS/Polycarbonate blend for rugged durability
- Wheels protect the cutting surface and glide smoothly
- Metal baseplate takes heavy jobsite abuse
- Quick and Easy tool-free installation
- Unobstructed view of blade for maximum precision
- Replacement parts available for extended shroud life
Dustless – DustBull & Universal Mounting Kit
- Vacuum shroud used in dust containment while using gas powered saws for masonry work
- 2018 Pro Tool Innovation Awards Winner, Dust Collection Shroud Category
- Fits most gas powered cut off saws and captures up to 90% of concrete dust
- Made of aluminum for rugged durability
- Rubber feet protect the work surface
- Connects to a 2” soft hose cuff
- Complies with OSHA Silica Rule
- Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)
Dustless – HEPA Wet and Dry Vacuum
- Fully certified and serialized HEPA filter for airtight rating
- Safe for silica, asbestos, lead paint, and hexavalent chromium removal and containment
- OSHA and EPA RRP compliant w/semi-auto filter cleaning mechanism
- Go between wet and dry without switching filters
- Filters and pre-filters won’t be compromised by water or slurry
- Will never blow dust or pickup back into the air
- Large capacity barrel easily holds 40 pounds of dust
Dustless -Wet and Dry Vacuum
- Exhausts absolutely no dust back into the air
- Triple layer filter system
- Captures extremely fine dust from drywall, concrete, wood, fiberglass, stone, and masonry products
- Clean filters without opening the unit
- Go between wet and dry without switching filters
- Filters and pre-filters won’t be compromised by water or slurry
- Large capacity barrel easily holds 40 pounds of dust
- New and improved barrel clamps
Wunderbag Micro Pre-Filters, 2 Pack
- Works with most major brands of vacuums to add superior filtration
- Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
- Rated at 0.5 microns of filtration for both airborne particles and water
- Retains its strength and filtration while vacuuming water and slurry
- Capable of holding 40 pounds of debris
Dustless – SawBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using reciprocating saws
- Fits most models of reciprocating saws
- Line-of-site gap for clear view of the blade to ensure precise cutting
- 2.5" bristles create a seal while maintaining flexibility in cutting
- Complies with EPA Regulations for point-of-origin dust containment
Showing all 12 results
Dustless – Wunderbag Micro Pre-Filters, 2 Pack
- Works with most major brands of vacuums to add superior filtration
- Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
- Rated at 0.5 microns of filtration for both airborne particles and water
- Retains its strength and filtration while vacuuming water and slurry
- Capable of holding 40 pounds of debris
Dustless -Wet and Dry Vacuum
- Exhausts absolutely no dust back into the air
- Triple layer filter system
- Captures extremely fine dust from drywall, concrete, wood, fiberglass, stone, and masonry products
- Clean filters without opening the unit
- Go between wet and dry without switching filters
- Filters and pre-filters won’t be compromised by water or slurry
- Large capacity barrel easily holds 40 pounds of dust
- New and improved barrel clamps
Wunderbag Micro Pre-Filters, 2 Pack
- Works with most major brands of vacuums to add superior filtration
- Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
- Rated at 0.5 microns of filtration for both airborne particles and water
- Retains its strength and filtration while vacuuming water and slurry
- Capable of holding 40 pounds of debris
Dustless – HEPA Wet and Dry Vacuum
- Fully certified and serialized HEPA filter for airtight rating
- Safe for silica, asbestos, lead paint, and hexavalent chromium removal and containment
- OSHA and EPA RRP compliant w/semi-auto filter cleaning mechanism
- Go between wet and dry without switching filters
- Filters and pre-filters won’t be compromised by water or slurry
- Will never blow dust or pickup back into the air
- Large capacity barrel easily holds 40 pounds of dust
Dustless – 5″ DustBuddie Shroud w/ 18″ Hose
- Vacuum shroud used in dust containment while grinding with angle grinders.
- Fits most 4-inch to 5-inch angle grinders.
- Made of clear polycarbonate for improved visibility and durability.
- Removable front edge of shroud for grinding close to a wall or edge.
- Complies with EPA regulations for point-of-origin dust containment when used with a Dustless Technologies D1606 HEPA Vacuum
Dustless – 7″ Worm Drive Saw Shroud
- Vacuum shroud used in dust containment while using worm drive and hypoid saws
- Fits most 7 1/4” worm drive and hypoid circular saws and captures up to 99% of concrete dust
- Made of an ABS/Polycarbonate blend for rugged durability
- Wheels protect the cutting surface and glide smoothly
- Metal baseplate takes heavy jobsite abuse
- Quick and Easy tool-free installation
- Unobstructed view of blade for maximum precision
- Replacement parts available for extended shroud life
Dustless – 1 3/8″ BitBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using drills and percussion hammers
- Captures up to 99% of concrete dust and slurry
- Works with any drill bit 1 3/8” or smaller
- Made of flexible rubber that sucks to any surface
- Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
Dustless – SawBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using reciprocating saws
- Fits most models of reciprocating saws
- Line-of-site gap for clear view of the blade to ensure precise cutting
- 2.5" bristles create a seal while maintaining flexibility in cutting
- Complies with EPA Regulations for point-of-origin dust containment
Dustless – DustBull & Universal Mounting Kit
- Vacuum shroud used in dust containment while using gas powered saws for masonry work
- 2018 Pro Tool Innovation Awards Winner, Dust Collection Shroud Category
- Fits most gas powered cut off saws and captures up to 90% of concrete dust
- Made of aluminum for rugged durability
- Rubber feet protect the work surface
- Connects to a 2” soft hose cuff
- Complies with OSHA Silica Rule
- Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)
Dustless – 7″ CutBuddie Shroud w/ 18″ Hose
- Vacuum shroud used in dust containment while tuck pointing and crack chasing with angle grinders
- Fits up to a 7-inch wheel on most 6 to 9-inch angle grinders
- Fits collars 3-inch down to 1.8-inch
- Adjustable depth for cutting up to 1.5”
- Made of polycarbonate for rugged durability
- Metal baseplate takes heavy jobsite abuse
- Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
Dustless – 4″ BitBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using drills and percussion hammers
- Captures up to 99% of concrete dust and slurry
- Works with any drill bit 4in or smaller
- Made of flexible rubber that sucks to any surface
- Complies with OSHA Silica Rule and EPA Regulations for point-of-origin dust containment
Dustless – DustBuddie for Flatwork
- Vacuum shroud used in dust containment while using gas powered saws for flatwork
- 2018 Pro Tool Innovation Awards Finalist , Dust Collection Shroud Category
- Fits most gas powered cut off saws and captures up to 90% of concrete dust
- Made of aluminum for rugged durability
- Polyethylene sliders to protect the work surface
- Connects to a 2” soft hose cuff
- Complies with OSHA Silica Rule when used with objective data (see link below)
- Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)