Metabo W24-180MVT 15 Amp Corded 7 in. Angle Grinder w/ MVT side handle
- Metabo Long-life motor with patented dust protection for long service life
- Deadman’s switch for high user protection
- Rotating back handle and side handle can be mounted at 3 positions for optimum handle position also when cutting
- Tool-free adjustable guard; twist-proof
- Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user’s health
- Metabo safety switch prevents unintentional start
- Auto-stop carbon brushes to protect the motor
Specifications:
Characteristics
- Grinding wheel Ø: 180 mm / 7 “
- No-load speed: 8450 rpm
- Revolutions at rated load: 5800 rpm
- Torque: 14 Nm / 124 in-lbs
- Spindle thread: 5/8″ – 11 UNC
- Weight (without power cable): 5.7 kg / 12.6 lbs
- Cable length: 4 m / 13 ft
Vibration
- Surface grinding: 6.1 m/s²
- Uncertainty of measurement K: 1.5 m/s²
- Grinding with sandpaper: 2.5 m/s²
- Uncertainty of measurement K: 1.5 m/s²
Noise emission
- Sound pressure level: 94 dB(A)
- Sound power level (LwA): 105 dB(A)
- Uncertainty of measurement K: 3 dB(A)
Includes:
- Guard
- Metabo VibraTech (MVT) side handle
You must be logged in to post a review.
Related products
Asphalt and Green Concrete Diamond Blades – SAS Series
Standard for asphalt and parking lot repairs , and green concrete. Laser welded and higher quality diamond formulation. Used on high speed saws and low HP walk behind saws. Great blade for asphalt contractors. The SAS blade is great for cutting abrasive block too.
Concrete Diamond Blade – CC-Hex Series
The CC-HEX blades are laser welded for fast cutting performance and long life. Good for cutting concrete.
Concrete Diamond Blade – TS-I Series
Arrow turbo segment blade, laser welded, 15mm segment height, reinforced concrete, hard granite, steel bar, fast cutting blade, able to cut very hard material. Recommended for high speed saws and walk behind saws up to 20hp.
Concrete Diamond Blade – CC Series
Premium, soft bond laser welded for hard materials, brick and block. Best used on high speed saws & low hp walk behind saws.
General Purpose Diamond Blade – TB-P Series
General Purpose Diamond Blade – CC
Premium, soft bond laser welded for hard materials, brick and block. Best used on high speed saws & low hp walk behind saws.
General Purpose Diamond Blade – SW Series
General Purpose Blade, 10mm rim, premium, laser welded, segmented and polished with diamond knock out. General Purpose Diamond blade for cutting brick, block, concrete and pavers. Dry or wet use with high speed power saws, masonry saws, angle grinders and circular saws.
Concrete Diamond Blade – SCC-P Series
Superior quality 15mm oversized segments for fast cutting and extended life for hard materials and reinforced concrete . Recommended for high speed saws and walk behind saws up to 20hp.

Reviews
There are no reviews yet.