- Sorry, this product cannot be purchased.
18″ FarmBoss Guide Bar
- Updated, modern graphic design
- FARM BOSS® lightweight guide bar
- Built from high-grade steel for added durability
- Three electrically welded metal plates for stability
- Narrow bar nose design for reduced kickback
- Rails are induction hardened for wear resistance
- Ensures long service life
- Length: 20″
- Nose Size: .325″ Pitch
- Gauge: .063″
- Type of Guide Bar: Farm Boss
Description
The ROLLOMATIC® E is a general-grade laminated guide bar made of high-grade steel. Consisting of three electrically welded metal plates, it is lightweight, yet provides great stability. A sprocket is incorporated in the nose of the bar that carries the saw chain from the top to the bottom of the bar. This not only reduces wear, but also enables the bar nose to be made considerably narrower. This type of construction is an advantage where extensive use is made of the bar nose (i.e. limbing and boring). All STIHL ROLLOMATIC® bars designed with a narrow nose help reduce kickback tendencies. And the star-shaped sprocket can be replaced several times before the whole bar is due for replacement, increasing the service life of the bar.
Additional information
| More Information | Applications: All-around guide bar suitable for small to medium-duty chainsaws. Typically, this bar is not used by professional operators. STIHL recommends using low-kickback, green-labeled chain and green-labeled reduced-kickback bars on all powerheads. |
|---|
Related products
Hitachi – Spline Shank Rotary Hammer
DH38YE3M, Metabo HPT 1-9/16 in. Spline Shank Rotary Hammer The 1-9/16" Spine Shank Rotary Hammer - model DH38YE3 is power packed into a more ergonomic body that is lighter and delivers less vibration. A simple turn of the knob changes the mode from hammer drilling to hammer only mode, allowing this rotary hammer to take on a variety of tasks including drilling holes in concrete, demolishing, and chiseling concrete, cutting, digging, tamping or driving ground rods.
The 10 amp, 1,140 watt motor produces 6.3 ft-lb of impact energy and delivers fast drilling and chiseling. A 360-Degree side handle and large trigger switch offer more control with less fatigue. With 23% more drilling speed and 46% more demolition performance you can get the job done even faster!
STIHL MotoMix®
Only from STIHL - This patented 50:1 fuel mixture combines non-ethanol, high-octane fuel and premium STIHL HP Ultra Oil.
We stand behind this formulation by doubling the limited warranty when you include MotoMix® with your power tool purchase. STIHL MotoMix® contains no ethanol, allowing it to maintain stability for up to two years after the seal is broken - so it stays fresh in your equipment during long storage periods.
GS 461 ROCK BOSS®
A powerful concrete cutter designed for deep cutting and square corners – perfect for construction and renovation projects.
Lightweight, easy to maneuver, fast-cutting concrete cutter for deep cutting and cutting corners. When you need to cut deep into concrete, reach for the Boss – the STIHL GS 461 ROCK BOSS®. This revolutionary concrete cutter changes the game with enhanced performance that cuts up to 15.7” deep into concrete, reinforced concrete (with rebar up to ½ inch), cinder blocks, masonry bricks, asphalt and soft stone. And it does all of this in a compact, lightweight package that is easy to maneuver and transport. It’s a great addition to your construction site when you need to get serious with concrete materials. And because it’s a STIHL, you know it delivers excellent performance. The GS 461 ROCK BOSS® features include a low exhaust emission engine, HD2 heavy-duty air filter, advanced water controls, low vibration, and our exclusive Diamond Abrasive Chain.
TS 700 STIHL Cutquik®
This cut-off machine is designed from top to bottom for extended service cutting.
STIHL Cutquik® cut-off machines are exactly what construction professionals have been looking for and using for years – a low-maintenance powerhouse that’s portable and easy to use. From the back of its ergonomic grip to the tip of its reversible cutting arm, every inch of these handheld machines is designed for ultimate performance.
TS 420 STIHL Cutquik®
A 14” cutting wheel puts this cut-off machine in the big leagues of performance, efficiency and ease of use. The TS 420 is so popular, it could possibly be called “the standard” to which other cut-off machines are compared. Users like it because it is compact, lightweight, reliable and proves itself day in and day out, all day long. The TS 420 features all the high-performance features of the TS 410 – including an X2 air filtration system for a clean and smooth-running engine and virtually maintenance-free filters. With the added benefit of a 14” cutting wheel, it will handle cuts up to 4.9 inches in depth. This cut-off machine backs up its larger cutting capacity with a ton of usability features.
