MS 271-FARM BOSS®
A high-performance, high-tech, fuel-efficient chainsaw.
Bringing reduced-emission technology to mid-range chainsaws, the STIHL MS 271 FARM BOSS® is ideal for felling, firewood cutting and storm cleanup tasks. An improved low-emission, fuel-efficient engine cuts emissions by 50% when compared to previous models and delivers 20% longer run times than traditional 2-stroke engines. Designed with user comfort in mind, its compact, ergonomic design and advanced anti-vibration system help to reduce operator fatigue while providing optimum control.
Description
The MS 271 FARM BOSS® replaces the mighty MS 270 with a saw that’s loaded with features and technology. It starts with a highly efficient engine that delivers 20% longer run times between refuelings – while cutting exhaust emissions in half compared to the MS 270. There’s also a pre-separation air filtration system that’s so effective, your air filter can last up to five times longer (now that’s high performance). All engineered into one compact, ergonomic design.
Additional information
| MS 271 FARM BOSS® Specifications | DISPLACEMENT 50.2 cc (3.06 cu. in.) ENGINE POWER 2.6 kW (3.49 bhp) POWERHEAD WEIGHT 5.6 kg (12.3 lbs.) FUEL CAPACITY 500 cc (16.9 oz.) CHAIN OIL CAPACITY 240 cc (8.12 oz.) OILOMATIC® CHAIN 26 RM3 GUIDE BAR LENGTHS (Recommended ranges) 40 to 50 cm (16″ to 20″) STIHL ROLLOMATIC® POWER SOURCE Gas |
|---|---|
| Chain & Bar Recommendations | STIHL recommends #3634 (26 RM3 67) OILOMATIC® saw chain and 16″ 3003 812 6813 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on. |
| WARNING! | The occurrence called “kickback” can cause serious or fatal injury. Always read the instruction manual carefully before using your saw. STIHL uses a green and yellow color-coding system to help you select a powerhead, bar and chain combination that complies with the kickback requirements of ANSI Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/ ANSI Standard B175.1 (electric chainsaws). Ask your STIHL dealer about safe operating procedures and the advantages of the STIHL Quickstop® chain brake, STIHL Quickstop® Plus (Q) additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback saw chains. |
| NOTE: | STIHL recommends use of fuel with no more than 10% ethanol content. Using fuel with greater than 10% ethanol content may cause damage to your equipment and may void your STIHL warranty. |
You may also like…
18″ FarmBoss Guide Bar
- Updated, modern graphic design
- FARM BOSS® lightweight guide bar
- Built from high-grade steel for added durability
- Three electrically welded metal plates for stability
- Narrow bar nose design for reduced kickback
- Rails are induction hardened for wear resistance
- Ensures long service life
- Length: 20"
- Nose Size: .325" Pitch
- Gauge: .063"
- Type of Guide Bar: Farm Boss
Related products
Hitachi – 15 amp Angle Grinder
HIGHLIGHTS OF THE 7 INCH ANGLE GRINDER
- POWERFUL: 15 Amp motor produces forcible 2,500W output for plenty of power, torque and durability for tough jobs
- LIGHTWEIGHT: At just 10.8lbs, the high power-to-weight ratio allows for optimal control and maneuverability
- DURABILITY: Class leading overload durability for increased life and reliability
Hitachi – Spline Shank Rotary Hammer
DH38YE3M, Metabo HPT 1-9/16 in. Spline Shank Rotary Hammer The 1-9/16" Spine Shank Rotary Hammer - model DH38YE3 is power packed into a more ergonomic body that is lighter and delivers less vibration. A simple turn of the knob changes the mode from hammer drilling to hammer only mode, allowing this rotary hammer to take on a variety of tasks including drilling holes in concrete, demolishing, and chiseling concrete, cutting, digging, tamping or driving ground rods.
The 10 amp, 1,140 watt motor produces 6.3 ft-lb of impact energy and delivers fast drilling and chiseling. A 360-Degree side handle and large trigger switch offer more control with less fatigue. With 23% more drilling speed and 46% more demolition performance you can get the job done even faster!
STIHL MotoMix®
Only from STIHL - This patented 50:1 fuel mixture combines non-ethanol, high-octane fuel and premium STIHL HP Ultra Oil.
We stand behind this formulation by doubling the limited warranty when you include MotoMix® with your power tool purchase. STIHL MotoMix® contains no ethanol, allowing it to maintain stability for up to two years after the seal is broken - so it stays fresh in your equipment during long storage periods.
TS 500i STIHL Cutquik®
A cut-off machine with the world’s first electronically controlled fuel-injection system that increases power, not weight when operating 14” wheels. Abrasive cutting just got more cutting edge. STIHL introduces another industry first with the TS 500i STIHL Cutquik® cut-off machine – the first handheld outdoor power tool to offer an electronically controlled fuel-injection system. This system increases power and performance over 15% while remaining lightweight and well-balanced. The fuel injection system makes starting easier and more reliable by eliminating the choke. Just set the switch to on, prime and pull. Lightweight, powerful and fuel-injected, this 14” cut-off machine is designed for superior balance and handling during your toughest jobs. And just like a powerful sports car, you will be impressed with the amazing acceleration of this machine, getting you back to speed faster than you thought possible. The STIHL TS 500i also features a high-efficiency engine with low exhaust emissions and optimal torque throughout its RPM range. Its Electronic Water Control (EWC) allows for easy water flow adjustment while cutting and its X2 air filtration system maintains an incredible 99.96% cleaning efficiency. This machine has it all, so very little can stand in your way.
