Another high-tech STIHL chainsaw, the MS 291 is built around one of our new fuel-saving engines with longer run times and lower emissions. And with an advanced pre-separation air filtration system, your air filter can last up to five times longer. Another great feature is an advanced anti-vibration system to reduce user fatigue. STIHL engineering is to thank for this high-powered, high-tech, low-maintenance chainsaw. It is truly a force to be reckoned with.
MS-291 – STIHL Chainsaw
A high-performance, fuel-efficient chainsaw. Great for felling, firewood cutting and storm cleanup.
The MS 291 chainsaw is an all-around reliable unit for farmers, landscapers and gardeners. Powered by a fuel-efficient, low-emission stratified scavenging engine technology which reduces fuel consumption by up to 20% and full fils all emission regulations, this saw also includes an advanced anti-vibration system, and lightweight muffler to reduce operator fatigue. Part of STIHL’s new generation of fuel-efficient, environmentally friendly chain saws.
Additional information
| MS 291 Specifications | DISPLACEMENT ENGINE POWER POWERHEAD WEIGHT FUEL CAPACITY CHAIN OIL CAPACITY OILOMATIC® CHAIN GUIDE BAR LENGTHS (Recommended ranges) 40 to 50 cm (16" to 20") POWER SOURCE |
|---|---|
| Chain & Bar Recommendations | STIHL recommends #3634 (26 RM3 67) OILOMATIC® saw chain and 16" 3003 000 6813 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on. |
| WARNING! | The occurrence called “kickback” can cause serious or fatal injury. Always read the instruction manual carefully before using your saw. STIHL uses a green and yellow color-coding system to help you select a powerhead, bar and chain combination that complies with the kickback requirements of ANSI Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/ ANSI Standard B175.1 (electric chainsaws). Ask your STIHL dealer about safe operating procedures and the advantages of the STIHL Quickstop® chain brake, STIHL Quickstop® Plus (Q) additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback saw chains. |
Related products
TS 420 STIHL Cutquik®
STIHL TS 420 Cutquik
An all purpose Cut-Off Machine for above and below ground. With a 350mm cutting blade to cut up to 125mm deep. The STIHL anti vibration system guarantees this Cut-off Machine is comfortable to operate. This machine also has a long life air filter system, and a decompression valve so it is easier to start. It is economical and environmentally friendly due to it's 2-MIX engine.
MS 271-FARM BOSS®
A high-performance, high-tech, fuel-efficient chainsaw.
Bringing reduced-emission technology to mid-range chainsaws, the STIHL MS 271 FARM BOSS® is ideal for felling, firewood cutting and storm cleanup tasks. An improved low-emission, fuel-efficient engine cuts emissions by 50% when compared to previous models and delivers 20% longer run times than traditional 2-stroke engines. Designed with user comfort in mind, its compact, ergonomic design and advanced anti-vibration system help to reduce operator fatigue while providing optimum control.
STIHL MotoMix®
Only from STIHL - This patented 50:1 fuel mixture combines non-ethanol, high-octane fuel and premium STIHL HP Ultra Oil.
We stand behind this formulation by doubling the limited warranty when you include MotoMix® with your power tool purchase. STIHL MotoMix® contains no ethanol, allowing it to maintain stability for up to two years after the seal is broken - so it stays fresh in your equipment during long storage periods.
16″ STIHL Diamond Abrasive Chain saw Blade-(36-GBM-64 Drive Links)
This chain is to be used exclusively with the GS 461 STIHL ROCK BOSS® concrete cutter and the STIHL ROLLOMATIC® G guide bars. The chain is designed to cut concrete, reinforced concrete (with rebar up to 1⁄2 inch), cinder blocks and masonry (including bricks, asphalt and soft stone such as sandstone). Cutting hard stone, such as granite, and ductile iron pipe are also approved applications but will reduce the service life of the chain. This unit is also intended for special projects involving precise corner cutting without overcutting.