Silent Sentinel Trailer-Mounted Arrow Board 25 Lamp
Wacker Neuson BS 50-4AS Compactor / Tamper / Jumping Jack
- Easy to start and simple operation. Convenient single-lever operation for start-up, idling and shut-off
- Low oil protection: When starting the unit, a sensor detects no or low oil and does not allow the engine to start, protecting the engine
- A unique four-stage air filtration system provides a virtually dust-free engine for longer life and improved durability. The system includes a last chance filter that protects the engine during air filter maintenance
NYCON Hydraulic Diamond Core Bit 8″ x 1-1/4 – 7, 10mm, 14″ Barrel, A-Flange
Chapin 4163 3.5-Gallon Industrial Tri-Poxy Water Supply Tank Sprayer
Warning: Cancer and Reproductive Harm.
Advertencia: Cáncer y Daños Reproductivos.
Avertissement: Cancer et Dommages Reproductifs.
- 3.5-Gallon Tri-Poxy tank - triple protection against rust, corrosion, and damage from dents
- 4-inch wide mouth opening for easy filling and cleaning
- Use for a portable water supply tank but durable enough for common industrial chemicals
- Brass hose fitting built into the tank
- Ergonomic, comfort handle
- Unique Tri-Lock seal feature that locks the pump cap tight
SweepMaster 300
CC7574DD IN-LINE WALK BEHIND SAW


CC6571D DIESEL LIQUID COOLED WALK BEHIND SAW


Chicago Pneumatic Triple Scabbler CP-0066
Chicago Pneumatic Sinker Drill 1” X 4-1/4”
Chicago Pneumatic 90 lb Silenced Breaker 1-1/8″ X
Chicago Pneumatic CP0004 40lb Tamper-Backfill w/ 6″ Butt
Metal Cutting Diamond Blades-LMC Series
- Up to 2 x faster than abrasive blades
- Lasts up to 60 x longer than abrasive blades
- More safe to use. Does not shrink like abrasive wheels
4.5″ Premium Cutting Abrasive—Depressed Center
Cup and Grinding Wheel – AWG Series
Cup and Grinding Wheel – TAW-S Series
Tuck Point Diamond Blade – TKS Series
Wall Saw Blade – Flush Cut Blade
Asphalt and Green Concrete Diamond Blade – LAS-H Series
Concrete Diamond Blade – TS-I Series
Concrete Diamond Blade – CW Series
Concrete Diamond Blade – LSTS-X Series
General Purpose Diamond Blade – ATP Series
General Purpose Diamond Blade – TB Series
General Purpose Diamond Blade – SW Series
General Purpose Diamond Blade – ATS-IH
General Purpose Diamond Blade – SG Series
General Purpose Diamond Blade – SG-P Series
WEKA DK32 Drill Motor Complete-30 AMP (110 V) 230/
M-3 Combo Rig W/VP W/14 AMP WEKA Motor DK13 580/14
M-1 Complete Combo Rig W/20AMP Core Bore Motor 120
M-1 Complete Anchor Rig W/20 AMP Milw. Motor 4096
General Purpose Diamond Blade – SW Series
Eames Plastic Side Chair
Wine bottle lantern
Wooden single drawer
Variable product example
Classic wooden chair
iPhone Dock
Decoration wooden present
Panton tunior chair
Smart watches wood edition
All Purpose Segmented Diamond Blade -CS-Series
- Laser Welded Segments
- Segmented Configuration
- Undercut Protection For Abrasive Materials Such as: Asphalt & Green Concrete
- Narrow "U" Gullets
- Dive Pin Hole
18″ Walk Behind Saw
High Performance 2-Cycle Engine Oil
A high performance 2-cycle engine oil for all STIHL products, especially professional chainsaws.
14″ Premium Cutting Abrasive Disc
6″ Premium Cutting Abrasive Disc—Flat Center
12″ Premium Cutting Abrasive Disc
Black & Decker Core Drill
Sawmaster SDT-1410 Table Saw-BRAND NEW!
CAYKEN-Core Drill Rig Motor with KCY-200F Aluminum Stand
Diamond Products Core Cut 30062 CB700 Electric Core Bore Drill Motor
Milwaukee Diamond Core Drill Motor 450/900 RPM, 20 Amp with Clutch
Husqvarna DM 340 Electric 3 Speed Core Drill Rig Motor
4.5″ Premium Cutting Abrasive Disc —Flat Center
Dustless – Wunderbag Micro Pre-Filters, 2 Pack
- Works with most major brands of vacuums to add superior filtration
- Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
- Rated at 0.5 microns of filtration for both airborne particles and water
- Retains its strength and filtration while vacuuming water and slurry
- Capable of holding 40 pounds of debris
Dustless -Wet and Dry Vacuum
- Exhausts absolutely no dust back into the air
- Triple layer filter system
- Captures extremely fine dust from drywall, concrete, wood, fiberglass, stone, and masonry products
- Clean filters without opening the unit
- Go between wet and dry without switching filters
- Filters and pre-filters won’t be compromised by water or slurry
- Large capacity barrel easily holds 40 pounds of dust
- New and improved barrel clamps
Wunderbag Micro Pre-Filters, 2 Pack
- Works with most major brands of vacuums to add superior filtration
- Seal for safe disposal of hazardous material such as silica, lead, asbestos, and hexavalent chromium
- Rated at 0.5 microns of filtration for both airborne particles and water
- Retains its strength and filtration while vacuuming water and slurry
- Capable of holding 40 pounds of debris
2-Cycle ULTRA Engine Oil
This fully synthetic 2-cycle engine oil is specially suited for high performance chainsaws and power tools.
QDM-150W Elite – Wet Core Drill Motor – 110 Volt
QDM-350 Drill Motor – 110 Volt, 3 Speed
STIHL – High-Performance Gloves
EZ-Grip II Gloves Black
STIHL – Trimmer Line .095″
STIHL – AutoCut® EasySpool™ Trimmer Heads
Cutting heads with EasySpool™ made for fast loading without opening.
STIHL MotoMix®
Only from STIHL - This patented 50:1 fuel mixture combines non-ethanol, high-octane fuel and premium STIHL HP Ultra Oil.
We stand behind this formulation by doubling the limited warranty when you include MotoMix® with your power tool purchase. STIHL MotoMix® contains no ethanol, allowing it to maintain stability for up to two years after the seal is broken - so it stays fresh in your equipment during long storage periods.18″ FarmBoss Guide Bar
The standard version of the STIHL ROLLOMATIC® Ematic™ bar consists of three electrically welded metal plates (laminated guide bars).
16″ Rollomatic G Guide Bar
A guide bar made exclusively for the GS 461 STIHL ROCK BOSS® and STIHL Diamond Abrasive Chain 36 GBM.
Applications: This guide bar is to be used exclusively with the GS 461 STIHL ROCK BOSS® concrete cutter and the STIHL Diamond Abrasive Chain 36 GBM; this guide bar is NOT to be used with any other STIHL products, including chainsaws. The bar is designed to cut concrete, reinforced concrete (with rebar up to ½ inch), cinder blocks and masonry (including bricks, asphalt and soft stone such as sandstone).16″ STIHL Diamond Abrasive Chain saw Blade-(36-GBM-64 Drive Links)
18″ Diamond Abrasive Stihl Chainsaw Chain (26 RM3 74 Drive Links)
MS 271-FARM BOSS®
A high-performance, high-tech, fuel-efficient chainsaw.
MS-291 – STIHL Chainsaw
A high-performance, fuel-efficient chainsaw. Great for felling, firewood cutting and storm cleanup.
The MS 291 chainsaw is an all-around reliable unit for farmers, landscapers and gardeners. Powered by a fuel-efficient, low-emission stratified scavenging engine technology which reduces fuel consumption by up to 20% and full fils all emission regulations, this saw also includes an advanced anti-vibration system, and lightweight muffler to reduce operator fatigue. Part of STIHL’s new generation of fuel-efficient, environmentally friendly chain saws.GS 461 ROCK BOSS®
A powerful concrete cutter designed for deep cutting and square corners – perfect for construction and renovation projects.
It’s a great addition to your construction site when you need to get serious with concrete materials. And because it’s a STIHL, you know it delivers excellent performance. The GS 461 ROCK BOSS® features include a low exhaust emission engine, HD2 heavy-duty air filter, advanced water controls, low vibration, and our exclusive Diamond Abrasive Saw Chain.TS 800 STIHL Cutquik®
The TS 800 Cut-off Machine now featuring a magnesium guard and reduced weight.
The TS 800 also features an ergonomic design and five-point advanced vibration control system built right into the handle, maximizing comfort so you can power through your day with less fatigue. When long, straight expansion joint cuts are needed, the optional cart, mounted water tank, guide wheel and depth gauge wheel make it easy to help keep the cut straight. With a cutting depth of up to 5.6”, the TS 800 is a real pro performer whether in your hands or on the cart.TS 700 STIHL Cutquik®
This cut-off machine is designed from top to bottom for extended service cutting.
STIHL Cutquik® cut-off machines are exactly what construction professionals have been looking for and using for years – a low-maintenance powerhouse that’s portable and easy to use. From the back of its ergonomic grip to the tip of its reversible cutting arm, every inch of these handheld machines is designed for ultimate performance.TS 500i STIHL Cutquik®
Stihl TS 500i The world's first fuel injected Cut-Off Saw
Abrasive cutting just got more cutting edge. STIHL introduces another industry first with the TS 500i STIHL Cutquik® cut-off machine – the first handheld outdoor power tool to offer an electronically controlled fuel-injection system. This system increases power and performance over 15% while remaining lightweight and well-balanced. The fuel injection system makes starting easier and more reliable by eliminating the choke. Just set the switch to on, prime and pull.TS 420 STIHL Cutquik®
STIHL TS 420 Cutquik
An all purpose Cut-Off Machine for above and below ground. With a 350mm cutting blade to cut up to 125mm deep. The STIHL anti vibration system guarantees this Cut-off Machine is comfortable to operate. This machine also has a long life air filter system, and a decompression valve so it is easier to start. It is economical and environmentally friendly due to it's 2-MIX engine.Dustless – HEPA Wet and Dry Vacuum
- Fully certified and serialized HEPA filter for airtight rating
- Safe for silica, asbestos, lead paint, and hexavalent chromium removal and containment
- OSHA and EPA RRP compliant w/semi-auto filter cleaning mechanism
- Go between wet and dry without switching filters
- Filters and pre-filters won’t be compromised by water or slurry
- Will never blow dust or pickup back into the air
- Large capacity barrel easily holds 40 pounds of dust
Dustless – 5″ DustBuddie Shroud w/ 18″ Hose
- Vacuum shroud used in dust containment while grinding with angle grinders.
- Fits most 4-inch to 5-inch angle grinders.
- Made of clear polycarbonate for improved visibility and durability.
- Removable front edge of shroud for grinding close to a wall or edge.
- Complies with EPA regulations for point-of-origin dust containment when used with a Dustless Technologies D1606 HEPA Vacuum
Dustless – 7″ Worm Drive Saw Shroud
- Vacuum shroud used in dust containment while using worm drive and hypoid saws
- Fits most 7 1/4” worm drive and hypoid circular saws and captures up to 99% of concrete dust
- Made of an ABS/Polycarbonate blend for rugged durability
- Wheels protect the cutting surface and glide smoothly
- Metal baseplate takes heavy jobsite abuse
- Quick and Easy tool-free installation
- Unobstructed view of blade for maximum precision
- Replacement parts available for extended shroud life
Dustless – 1 3/8″ BitBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using drills and percussion hammers
- Captures up to 99% of concrete dust and slurry
- Works with any drill bit 1 3/8” or smaller
- Made of flexible rubber that sucks to any surface
- Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
Dustless – 5″ DustBuddie XP w/ 18″ Hose
- Vacuum shroud used in dust containment while grinding with angle grinders
- Fits up to a 5-inch wheel on most 4.5 to 6-inch angle grinders
- Fits collars 2.1-inch down to 1.3-inch
- Made of glass-filled nylon for abrasion resistance and rugged durability
- Sliding front edge of shroud for grinding close to a wall or edge
- Patented floating head design
- Replaceable brush skirt improves dust collection
- Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
Dustless – SawBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using reciprocating saws
- Fits most models of reciprocating saws
- Line-of-site gap for clear view of the blade to ensure precise cutting
- 2.5" bristles create a seal while maintaining flexibility in cutting
- Complies with EPA Regulations for point-of-origin dust containment
Dustless – DustBull & Universal Mounting Kit
- Vacuum shroud used in dust containment while using gas powered saws for masonry work
- 2018 Pro Tool Innovation Awards Winner, Dust Collection Shroud Category
- Fits most gas powered cut off saws and captures up to 90% of concrete dust
- Made of aluminum for rugged durability
- Rubber feet protect the work surface
- Connects to a 2” soft hose cuff
- Complies with OSHA Silica Rule
- Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)
Dustless – 7″ CutBuddie Shroud w/ 18″ Hose
- Vacuum shroud used in dust containment while tuck pointing and crack chasing with angle grinders
- Fits up to a 7-inch wheel on most 6 to 9-inch angle grinders
- Fits collars 3-inch down to 1.8-inch
- Adjustable depth for cutting up to 1.5”
- Made of polycarbonate for rugged durability
- Metal baseplate takes heavy jobsite abuse
- Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment
Dustless – 4″ BitBuddie w/ 18″ Hose
- Vacuum shroud used in dust containment while using drills and percussion hammers
- Captures up to 99% of concrete dust and slurry
- Works with any drill bit 4in or smaller
- Made of flexible rubber that sucks to any surface
- Complies with OSHA Silica Rule and EPA Regulations for point-of-origin dust containment
Dustless – DustBuddie for Flatwork
- Vacuum shroud used in dust containment while using gas powered saws for flatwork
- 2018 Pro Tool Innovation Awards Finalist , Dust Collection Shroud Category
- Fits most gas powered cut off saws and captures up to 90% of concrete dust
- Made of aluminum for rugged durability
- Polyethylene sliders to protect the work surface
- Connects to a 2” soft hose cuff
- Complies with OSHA Silica Rule when used with objective data (see link below)
- Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)
Core Drill Bits – Aero
- W-Shape gives the segment more cutting edges
- Larger diamonds in the segment increases the speed of cut, and also the life of the segment due to the high quality bond system
- Better Water coverage means that slurry is cleared out faster and there is more water around the point of cut
- Low Friction Design due to the unique shape ensures faster cutting and free cutting in steel
Core Drill Bits – Z1
- Rooftop design makes starting the cut faster and easier
- Turbo Slots in the segment improves slurry removal
- Fast drilling in reinforced concrete
- Ideal for low to medium power motors
Core Drill Bits – K50
- Twisted rooftop design segment makes starting the cut faster and easier
- Ideal for Hand Held motors
- Fast cutting in reinforced concrete and hard materials

Cup and Grinding Wheel – WGP Series – PDR
Cup and Grinding Wheel – WGP Series
Cup and Grinding Wheel – AWT Series
Cup and Grinding Wheel – AWR-P Series
Cup and Grinding Wheel – TTAW-P Series
Cup and Grinding Wheel – AW Series – P
Cup and Grinding Wheel – AW Series
Cup and Grinding Wheel – TCW-P Series
Cup and Grinding Wheel – TAW-P Series
Tuck Point Diamond Blade – LMC Series
Tuck Point Diamond Blade – TK-T Series
Tuck Point Diamond Blade – TKS-S Series
Tuck Point Diamond Blade – TKG Series
Tuck Point Diamond Blade – TK-P Series
Tuck Point Diamond Blade – TK-S Series
Granite and Marble Blade – V-MAX GSV-M Series
GSV-M Series is a Supreme blade engineered with V-Max Patterned Diamond technology which maximizes every diamond’s life and cutting efficiency. Designed with high quality diamond matrix, the GSV-M delivers superior performance with fast, smooth, and clean cutting of stone materials including granite.
Applications: Marble, Granite and Fieldstone
Granite and Marble Blade – EP Series
Granite and Marble Blade – GM Series
Granite and Marble Blade – TGW Series – DH3
Granite and Marble Blade – TGW Series
The wave core design of the TGW-P blades provides a strong core that allows air to circulate, displacing debris and enhancing cutting speed.
Applications: Marble, Granite, Block, Concrete, Hard Concrete, Pavers, Hard Brick.
Granite and Marble Blade – TG-SP Series
Applications: Marble, Granite and Stone
Granite and Marble Blade – TG-XH Series
Tile and Glass Blade – CG Series
The CG blades are a Supreme designed blade with a continuous rim specially formulated for smooth and chip-free cutting of glass.
Applications: Glass Tile
Tile and Porcelain Blade – CTD Series
The CTD blade is a Premium blade ideal for dry cutting of ceramic and porcelain tile. Expect smooth, clean cuts and an overall good performance.
Applications: Porcelain Tile, Ceramic Tile, Marble, Granite.
Tile and Porcelain Blade – CTR Razor Series
The CTR blade is a Supreme diamond blade, with a supreme diamond bond and features laser-cut slots which helps release stress, eliminate wobbling, and reduce vibration for a cleaner, faster, smoother cut.
Applications: Porcelain Tile, Ceramic Tile, Granite, Marble, Natural Stone, Engineered Stone.Tile and Porcelain Blade – CTB Series
The CTB blade is a Supreme blade that is designed with unique bullet-shaped laser cut slots, ultra thin core, and supreme diamond formulation for smooth, fast, and clean cutting of ceramic and porcelain tile.
Applications: Porcelain Tile, Ceramic Tile, Granite, Marble, Natural Stone, Engineered Stone.
Tile and Porcelain Blade – CT-P Series
The Supreme diamond formulation of the CT-P blade provides a cleaner, faster, smoother, and free cutting of various tile & vitreous materials.
Applications: Porcelain Tile, Ceramic Tile, Granite, Marble, Natural Stone, Engineered Stone.
Tile and Porcelain Blade – CT Series
The CT blade has a Premium continuous rim that offers a great value for smooth and fast cutting of ceramic and porcelain tile.
Applications: Porcelain Tile, Ceramic Tile, Marble, Granite
Rescue/Demo Diamond Blade – LRC Series
V-Tech makes the blades extremely fast cutting and significantly improving cutting efficiency and cooling. Cuts all types of construction materials including concrete, masonry, ductile iron, light metals, PVC, rebar, brick, pavers, refractory brick, roof files.
Applications: Concrete, Brick, Field Stone, Refractory Brick, Pavers, Roof Tile, Ductile Iron, PVC, Light Metals.
Ductile Iron Diamond Blade-LWR Series
The LWR is engineered with a specialized formula to cut ductile iron. Other uses include the cutting of rebar and rail ties. The LWR blade features turbo segments and electroplated diamond swirl side protection on the core providing contractors with smoother cuts.
Applications: Ductile Iron, designed specifically for cutting through iron pipe and concrete coated steel piping.Super All Cut Diamond Blade- LAC Series
The LAC is well known in the industry and a pioneer in the combo blade category. The blade comes with all purpose segments, 12mm undercut protection, slanted gullets, cooling holes and a signature red paint job that has made it often imitated but never duplicated in its supreme quality.
Applications: Concrete, Brick, Field Stone, Refractory Brick, Pavers, Roof Tile, Ductile Iron, Green Concrete, Asphalt, Granite, Marble.Super Combo Diamond Blade – LSTS Series
Top performance for cutting all materials and satisfying all contractors, the LSTS blade has 12mm all turbo segments with 15mm full size turbo segmented undercut rim. It is extremely reliable and offers a very smooth cut. Use on a high speed saw, masonry saw and a walk behind saw up to 20HP.
Applications: Concrete, Brick, Field Stone, Refractory Brick, Pavers, Roof Tile, Ductile Iron, Green Concrete, Asphalt, Granite, Marble.
All Cut Pro Diamond Blade – LK-H Series
The LK series is a Premium blade that contains a signature combination of segments which alternate from smooth to turbo to make it one of the fastest cutting blades in the market. The blade includes a supreme formulation with 12mm undercuts and strategically placed cooling holes to maximize performance when cutting a wide variety of materials.
Applications: Concrete, Hard Concrete, Hard Brick, Field Stone, Refractory Brick, Ductile Iron, Green Concrete, Asphalt, Granite, Marble.Wall Saw Blade – Wall Blade
Wall Saw Blade – Ring Saw Blade
Masonry Diamond Blade – TS Series
Masonry Diamond Blade – SCC-P Series
Masonry Diamond Blade – LSU Series
Applications: Concrete, Hard Concrete, Refractory Brick, Stone
Masonry Diamond Blade – WST Series
The WST Series is a Premium blade, with a unique turbo split segment design, that provides a very fast and aggressive cut for high speed, stationary, and walk behind saws up to 13HP. A 12mm segment height gives the blade an extended cutting life.
Applications: Concrete, Hard Concrete, Hard Brick, Field Stone.
Masonry Diamond Blade – CC Series
Masonry Diamond Blade – UB14X Series
Masonry Diamond Blade – SW Series
The SW series is a Supreme standard laser welded blade, that provides heavy duty performance and an extended cutting life on a wide window of application including concrete, block, pavers, brick, and other masonry materials. A popular choice among general contractors looking for the most affordable blade with a heavy duty performance.
Applications: General Purpose, Block, Concrete, Pavers, Brick