TS 700 STIHL Cutquik®
This cut-off machine is designed from top to bottom for extended service cutting.
STIHL Cutquik® cut-off machines are exactly what construction professionals have been looking for and using for years – a low-maintenance powerhouse that’s portable and easy to use. From the back of its ergonomic grip to the tip of its reversible cutting arm, every inch of these handheld machines is designed for ultimate performance.
The 14” STIHL TS 700 cut-off machine is the powerhouse of the STIHL line. Designed for superior handling during the toughest jobs, this machine features a powerful, high-speed engine, large fuel capacity, five-point dual element vibration control system built right into the handle, and a semi-automatic belt tensioner with an innovative ribbed belt. Its X2 filtration system is low maintenance and cleans airflow with nearly 100 percent efficiency, reducing downtime for filter maintenance. Each component on this machine was meticulously engineered with demanding professionals in mind.
Abrasive wheel included. Diamond wheel (shown) sold separately.
| TS 700 STIHL Cutquik® Specifications | DISPLACEMENT 98.5 cc (6.0 cu. in.) ENGINE POWER 5.0 kW (6.7 bhp) WEIGHT* 11.6 kg (25.6 lbs.) FUEL TANK CAPACITY 1200 cc (40.6 oz.) ENGINE SPEED 9,300 rpm (Elec. Gov.) MAXIMUM SPINDLE SPEED 5,350 rpm ARBOR SIZE 20 mm MAXIMUM WHEEL SIZE 350 mm (14″) MAXIMUM CUTTING DEPTH 125 mm (4.9″) POWER SOURCE Gas |
|---|---|
| NOTE: | STIHL recommends use of fuel with no more than 10% ethanol content. Using fuel with greater than 10% ethanol content may cause damage to your equipment and may void your STIHL warranty. |
| WARNING: | Never use carbide-tipped, wood cutting or circular saw blades on cut-off machines. They can cause severe personal injury or death from reactive forces, blade contact or thrown tips. Never cut wood of any type. |
Related products
Hitachi – Spline Shank Rotary Hammer
DH38YE3M, Metabo HPT 1-9/16 in. Spline Shank Rotary Hammer
The 1-9/16" Spine Shank Rotary Hammer - model DH38YE3 is power packed into a more ergonomic body that is lighter and delivers less vibration. A simple turn of the knob changes the mode from hammer drilling to hammer only mode, allowing this rotary hammer to take on a variety of tasks including drilling holes in concrete, demolishing, and chiseling concrete, cutting, digging, tamping or driving ground rods.
The 10 amp, 1,140 watt motor produces 6.3 ft-lb of impact energy and delivers fast drilling and chiseling. A 360-Degree side handle and large trigger switch offer more control with less fatigue. With 23% more drilling speed and 46% more demolition performance you can get the job done even faster!
TS 500i STIHL Cutquik®
A cut-off machine with the world’s first electronically controlled fuel-injection system that increases power, not weight when operating 14” wheels.
Abrasive cutting just got more cutting edge. STIHL introduces another industry first with the TS 500i STIHL Cutquik® cut-off machine – the first handheld outdoor power tool to offer an electronically controlled fuel-injection system. This system increases power and performance over 15% while remaining lightweight and well-balanced. The fuel injection system makes starting easier and more reliable by eliminating the choke. Just set the switch to on, prime and pull. Lightweight, powerful and fuel-injected, this 14” cut-off machine is designed for superior balance and handling during your toughest jobs. And just like a powerful sports car, you will be impressed with the amazing acceleration of this machine, getting you back to speed faster than you thought possible. The STIHL TS 500i also features a high-efficiency engine with low exhaust emissions and optimal torque throughout its RPM range. Its Electronic Water Control (EWC) allows for easy water flow adjustment while cutting and its X2 air filtration system maintains an incredible 99.96% cleaning efficiency. This machine has it all, so very little can stand in your way.
TS 420 STIHL Cutquik®
A 14” cutting wheel puts this cut-off machine in the big leagues of performance, efficiency and ease of use.
The TS 420 is so popular, it could possibly be called “the standard” to which other cut-off machines are compared. Users like it because it is compact, lightweight, reliable and proves itself day in and day out, all day long. The TS 420 features all the high-performance features of the TS 410 – including an X2 air filtration system for a clean and smooth-running engine and virtually maintenance-free filters. With the added benefit of a 14” cutting wheel, it will handle cuts up to 4.9 inches in depth. This cut-off machine backs up its larger cutting capacity with a ton of usability features.
