Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 26RM3 is part of the Stihl Micro 3 series. This chain has reduced kickback and low vibration features. 26RM3 has semi-chisel cutters which work cut relatively fast, and stay sharp much longer in abrasive conditions as compared to chisel chain.
18″ Diamond Abrasive Stihl Chainsaw Chain (26 RM3 74 Drive Links)
$0.00
Related products
16″ Rollomatic G Guide Bar
A guide bar made exclusively for the GS 461 STIHL ROCK BOSS® and STIHL Diamond Abrasive Chain 36 GBM.
Applications: This guide bar is to be used exclusively with the GS 461 STIHL ROCK BOSS® concrete cutter and the STIHL Diamond Abrasive Chain 36 GBM; this guide bar is NOT to be used with any other STIHL products, including chainsaws. The bar is designed to cut concrete, reinforced concrete (with rebar up to ½ inch), cinder blocks and masonry (including bricks, asphalt and soft stone such as sandstone).
TS 420 STIHL Cutquik®
STIHL TS 420 Cutquik
An all purpose Cut-Off Machine for above and below ground. With a 350mm cutting blade to cut up to 125mm deep. The STIHL anti vibration system guarantees this Cut-off Machine is comfortable to operate. This machine also has a long life air filter system, and a decompression valve so it is easier to start. It is economical and environmentally friendly due to it's 2-MIX engine.
16″ STIHL Diamond Abrasive Chain saw Blade-(36-GBM-64 Drive Links)
This chain is to be used exclusively with the GS 461 STIHL ROCK BOSS® concrete cutter and the STIHL ROLLOMATIC® G guide bars. The chain is designed to cut concrete, reinforced concrete (with rebar up to 1⁄2 inch), cinder blocks and masonry (including bricks, asphalt and soft stone such as sandstone). Cutting hard stone, such as granite, and ductile iron pipe are also approved applications but will reduce the service life of the chain. This unit is also intended for special projects involving precise corner cutting without overcutting.
